Can I run a Wifi Router off one 400W panel?

Usually not continuously. With ~5 peak sun hours and ~20% system losses, most setups need around 1 × 400W panels for the daily energy shown.

What if it’s cloudy or winter?

Production drops. Add 20–30% extra panel capacity and consider a battery for cloudy stretches.

How Many Solar Panels for a Wifi Router?

Rule-of-thumb estimate using typical wattage and usage hours. Fine‑tune with our calculators.

A typical Wifi Router uses around 10 W. If you run it for 24 h/day, that’s roughly 0.2 kWh/day. With about 5 peak sun hours and a realistic 20% system derate, you’d need approximately 1 × 400 W panels (≈ 0.06 kW of array).

👉 Try the Panel Sizing Calculator to plug in your exact sun hours and system losses.

Check battery & charging time

Battery Runtime Calculator — see how long a battery will run your Wifi Router.
Charge Time Calculator — estimate how long your panels take to recharge.
Inverter Size Calculator — make sure your inverter handles startup and continuous load.

Quick math

Daily energy = watts × hours ÷ 1000 = 0.2 kWh
Array kW ≈ daily kWh ÷ (PSH × (1 − derate)) = 0.06 kW
400W panel count ≈ array W ÷ 400 = 1

Tips

Panels rarely output full nameplate — 70–80% in good sun is common.
Cold panels perform better; heat and clouds reduce output.
Angle panels toward the sun and keep them clean for best results.